2016 Consumer Confidence Report

Is my water safe?


We are pleased to present this year's Annual Water Quality Report (Consumer Confidence Report) as required by the Safe Drinking Water Act (SDWA). This report is designed to provide details about where your water comes from, what it contains, and how it compares to standards set by regulatory agencies. This report is a snapshot of last year's water quality. We are committed to providing you with information because informed customers are our best allies.

 

Do I need to take special precautions?


Some people may be more vulnerable to contaminants in drinking water than the general population. Immuno-compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ transplants, people with HIV/AIDS or other immune system disorders, some elderly, and infants can be particularly at risk from infections. These people should seek advice about drinking water from their health care providers. EPA/Centers for Disease Control (CDC) guidelines on appropriate means to lessen the risk of infection by Cryptosporidium and other microbial contaminants are available from the Safe Water Drinking Hotline (800-426-4791).

 

Where does my water come from?


Our water come from three deep ground water wells.

 

Source water assessment and its availability


We have a source water assessment and that report can be obtained by going to City Hall and requesting it. We are currently doing a study for our Facilities Plan. This will help in understanding our demands for our water, current and future plans, to help ensure our source water is protected from overuse and to keep that water coming to your households safely.

 

Why are there contaminants in my drinking water?


Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. The presence of contaminants does not necessarily indicate that water poses a health risk. More information about contaminants and potential health effects can be obtained by calling the Environmental Protection Agency's (EPA) Safe Drinking Water Hotline (800-426-4791). The sources of drinking water (both tap water and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs, and wells. As water travels over the surface of the land or through the ground, it dissolves naturally occurring minerals and, in some cases, radioactive material, and can pick up substances resulting from the presence of animals or from human activity:
microbial contaminants, such as viruses and bacteria, that may come from sewage treatment plants, septic systems, agricultural livestock operations, and wildlife; inorganic contaminants, such as salts and metals, which can be naturally occurring or result from urban stormwater runoff, industrial, or domestic wastewater discharges, oil and gas production, mining, or farming; pesticides and herbicides, which may come from a variety of sources such as agriculture, urban stormwater runoff, and residential uses; organic Chemical Contaminants, including synthetic and volatile organic chemicals, which are by-products of industrial processes and petroleum production, and can also come from gas stations, urban stormwater runoff, and septic systems; and radioactive contaminants, which can be naturally occurring or be the result of oil and gas production and mining activities. In order to ensure that tap water is safe to drink, EPA prescribes regulations that limit the amount of certain contaminants in water provided by public water systems. Food and Drug Administration (FDA) regulations establish limits for contaminants in bottled water which must provide the same protection for public health.

 

How can I get involved?


All the citizens of Harrison can be involved by keeping me informed of their water quality. Please report any suspicious activity around our area, always report any illegal dumping in our area. Call me and tell me of your concerns at 208-582-1530 or text me. I will go and check the situation at any time. Water quality is very important to us all in this day and age and all of us need to ensure water quality protection. Thank you for your help.
Robert Poole your Responsible Charge Operator

 

Description of Water Treatment Process


Your water is treated by disinfection. Disinfection involves the addition of chlorine or other disinfectant to kill dangerous bacteria and microorganisms that may be in the water. Disinfection is considered to be one of the major public health advances of the 20th century.

 

Water Conservation Tips

 

Did you know that the average U.S. household uses approximately 400 gallons of water per day or 100 gallons per person per day? Luckily, there are many low-cost and no-cost ways to conserve water. Small changes can make a big difference - try one today and soon it will become second nature.

 

Cross Connection Control Survey

 

The purpose of this survey is to determine whether a cross-connection may exist at your home or business. A cross connection is an unprotected or improper connection to a public water distribution system that may cause contamination or pollution to enter the system. We are responsible for enforcing cross-connection control regulations and insuring that no contaminants can, under any flow conditions, enter the distribution system. If you have any of the devices listed below please contact us so that we can discuss the issue, and if needed, survey your connection and assist you in isolating it if that is necessary.

 

Source Water Protection Tips

 

Protection of drinking water is everyone's responsibility. You can help protect your community's drinking water source in several ways:

 

Important infromation for water consumers


All the citizens of Harrison can help by keeping me informed of their water quality. Please report any suspicious activity around our area, always report any illegal dumping in our area. Call me and tell me of your concerns at 208-582-1530 or text me. I will go and check the situation at any time. Water quality is very important to us all in this day and age and all of us need to ensure water quality protection. Thank you for your help.
Robert Poole your Responsible Charge Operator

 

Monitoring and reporting of compliance data violations


The City of Harrison was required to monitor for VOCS-Group on well number 3 between 01/01/2016 to 12/31/2016. I have in my records that I took that VOCS-Group on 06/08/2016 The same date I took many tests in somehow we could not find those results As soon as I could I re-took those tests on 04/24/2017 not only did I test Well number 3 but also took the same VOCS-Group on Well number two They both came back with Non-detect results. So for that period of time 01/01/2016 to 04/24/2017 we have to say "health effects unknown". I Included those test results taken on 04/24/2017 in the 2016 Consumer Confidence Report. VOCS testing Is very important to me as your operator it would expose any fuels ,oils and other VOCS that have somehow effected or wells. It would expose illegal dumping in sensitive areas that some how got in our groundwater. I have included the following definition: Volatile Organic Compounds (VOCs)Organic compounds in the air that combine with other pollutants to form ozone and fine particulate matter. They are common in household and industrial products, such as paints and varnishes, solvents, and fuels.

 

Additional Information for Lead


If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is primarily from materials and components associated with service lines and home plumbing. City of Harrison is responsible for providing high quality drinking water, but cannot control the variety of materials used in plumbing components. When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking. If you are concerned about lead in your water, you may wish to have your water tested. Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline or at http://www.epa.gov/safewater/lead.

 

Additional Information for Arsenic


While your drinking water meets EPA's standard for arsenic, it does contain low levels of arsenic. EPA's standard balances the current understanding of arsenic's possible health effects against the costs of removing arsenic from drinking water. EPA continues to research the health effects of low levels of arsenic which is a mineral known to cause cancer in humans at high concentrations and is linked to other health effects such as skin damage and circulatory problems.

 


Water Quality Data Table

In order to ensure that tap water is safe to drink, EPA prescribes regulations which limit the amount of contaminants in water provided by public water systems. The table below lists all of the drinking water contaminants that we detected during the calendar year of this report. Although many more contaminants were tested, only those substances listed below were found in your water. All sources of drinking water contain some naturally occurring contaminants. At low levels, these substances are generally not harmful in our drinking water. Removing all contaminants would be extremely expensive, and in most cases, would not provide increased protection of public health. A few naturally occurring minerals may actually improve the taste of drinking water and have nutritional value at low levels. Unless otherwise noted, the data presented in this table is from testing done in the calendar year of the report. The EPA or the State requires us to monitor for certain contaminants less than once per year because the concentrations of these contaminants do not vary significantly from year to year, or the system is not considered vulnerable to this type of contamination. As such, some of our data, though representative, may be more than one year old. In this table you will find terms and abbreviations that might not be familiar to you. To help you better understand these terms, we have provided the definitions below the table.

 

Contaminants

MCLG
or
MRDLG

MCL,
TT, or
MRDL

Detect In
Your Water

Range

Sample
Date

Violation

Typical Source

Low

High

Disinfectants & Disinfection By-Products

(There is convincing evidence that addition of a disinfectant is necessary for control of microbial contaminants)

Chlorine (as Cl2) (ppm)

4

4

.62

.37

.62

2016

No

Water additive used to control microbes

Haloacetic Acids (HAA5) (ppb)

NA

60

2.56

NA

NA

2016

No

By-product of drinking water chlorination

TTHMs [Total Trihalomethanes] (ppb)

NA

80

14.8

NA

NA

2016

No

By-product of drinking water disinfection

Inorganic Contaminants

Arsenic (ppb)

0

10

3

NA

NA

2013

No

Erosion of natural deposits; Runoff from orchards; Runoff from glass and electronics production wastes

Barium (ppm)

2

2

.079

NA

NA

2013

No

Discharge of drilling wastes; Discharge from metal refineries; Erosion of natural deposits

Fluoride (ppm)

4

4

.3

NA

NA

2013

No

Erosion of natural deposits; Water additive which promotes strong teeth; Discharge from fertilizer and aluminum factories

Nitrate [measured as Nitrogen] (ppm)

10

10

.08

NA

.08

2016

No

Runoff from fertilizer use; Leaching from septic tanks, sewage; Erosion of natural deposits

Microbiological Contaminants

Total Coliform (TCR) (positive samples/month)

0

1

0

NA

NA

2016

No

Naturally present in the environment

Radioactive Contaminants

Alpha emitters (pCi/L)

0

15

2.5

.6

2.5

2016

No

Erosion of natural deposits

Beta/photon emitters (pCi/L)

0

50

5.4

2.4

5.4

2016

No

Decay of natural and man-made deposits. The EPA considers 50 pCi/L to be the level of concern for Beta particles.

Radium (combined 226/228) (pCi/L)

0

5

2.1

1

2.1

2016

No

Erosion of natural deposits

Uranium (ug/L)

0

30

1

NA

1

2016

No

Erosion of natural deposits

Volatile Organic Contaminants

Ethylbenzene (ppb)

700

700

NA

NA

0

2013

No

Discharge from petroleum refineries

 

Contaminants

MCLG

AL

Your
Water

Sample
Date

# Samples
Exceeding AL

Exceeds AL

Typical Source

Inorganic Contaminants

Copper - action level at consumer taps (ppm)

1.3

1.3

.039

2016

0

No

Corrosion of household plumbing systems; Erosion of natural deposits

Inorganic Contaminants

Lead - action level at consumer taps (ppb)

0

15

0

2016

0

No

Corrosion of household plumbing systems; Erosion of natural deposits

 


Undetected Contaminants

The following contaminants were monitored for, but not detected, in your water.

 

Contaminants

MCLG
or
MRDLG

MCL,
TT, or
MRDL

Your
Water

Violation

Typical Source

1,1,1-Trichloroethane (ppb)

200

200

ND

No

Discharge from metal degreasing sites and other factories

1,1,2-Trichloroethane (ppb)

3

5

ND

No

Discharge from industrial chemical factories

1,1-Dichloroethylene (ppb)

7

7

ND

No

Discharge from industrial chemical factories

1,2,4-Trichlorobenzene (ppb)

70

70

ND

No

Discharge from textile-finishing factories

1,2-Dichloroethane (ppb)

0

5

ND

No

Discharge from industrial chemical factories

1,2-Dichloropropane (ppb)

0

5

ND

No

Discharge from industrial chemical factories

Antimony (ppb)

6

6

ND

No

Discharge from petroleum refineries; fire retardants; ceramics; electronics; solder; test addition.

Asbestos (MFL)

7

7

ND

No

Decay of asbestos cement water mains; Erosion of natural deposits

Benzene (ppb)

0

5

ND

No

Discharge from factories; Leaching from gas storage tanks and landfills

Beryllium (ppb)

4

4

ND

No

Discharge from metal refineries and coal-burning factories; Discharge from electrical, aerospace, and defense industries

Cadmium (ppb)

5

5

ND

No

Corrosion of galvanized pipes; Erosion of natural deposits; Discharge from metal refineries; runoff from waste batteries and paints

Carbon Tetrachloride (ppb)

0

5

ND

No

Discharge from chemical plants and other industrial activities

Chlorobenzene (monochlorobenzene) (ppb)

100

100

ND

No

Discharge from chemical and agricultural chemical factories

Dichloromethane (ppb)

0

5

ND

No

Discharge from pharmaceutical and chemical factories

Mercury [Inorganic] (ppb)

2

2

ND

No

Erosion of natural deposits; Discharge from refineries and factories; Runoff from landfills; Runoff from cropland

Selenium (ppb)

50

50

ND

No

Discharge from petroleum and metal refineries; Erosion of natural deposits; Discharge from mines

Styrene (ppb)

100

100

ND

No

Discharge from rubber and plastic factories; Leaching from landfills

Tetrachloroethylene (ppb)

0

5

ND

No

Discharge from factories and dry cleaners

Thallium (ppb)

.5

2

ND

No

Discharge from electronics, glass, and Leaching from ore-processing sites; drug factories

Toluene (ppm)

1

1

ND

No

Discharge from petroleum factories

Trichloroethylene (ppb)

0

5

ND

No

Discharge from metal degreasing sites and other factories

Vinyl Chloride (ppb)

0

2

ND

No

Leaching from PVC piping; Discharge from plastics factories

Xylenes (ppm)

10

10

ND

No

Discharge from petroleum factories; Discharge from chemical factories

cis-1,2-Dichloroethylene (ppb)

70

70

ND

No

Discharge from industrial chemical factories

o-Dichlorobenzene (ppb)

600

600

ND

No

Discharge from industrial chemical factories

p-Dichlorobenzene (ppb)

75

75

ND

No

Discharge from industrial chemical factories

trans-1,2-Dichloroethylene (ppb)

100

100

ND

No

Discharge from industrial chemical factories

 


Unit Descriptions

Term

Definition

ug/L

ug/L : Number of micrograms of substance in one liter of water

ppm

ppm: parts per million, or milligrams per liter (mg/L)

ppb

ppb: parts per billion, or micrograms per liter (g/L)

pCi/L

pCi/L: picocuries per liter (a measure of radioactivity)

MFL

MFL: million fibers per liter, used to measure asbestos concentration

positive samples/month

positive samples/month: Number of samples taken monthly that were found to be positive

NA

NA: not applicable

ND

ND: Not detected

NR

NR: Monitoring not required, but recommended.

 

Important Drinking Water Definitions

Term

Definition

MCLG

MCLG: Maximum Contaminant Level Goal: The level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs allow for a margin of safety.

MCL

MCL: Maximum Contaminant Level: The highest level of a contaminant that is allowed in drinking water. MCLs are set as close to the MCLGs as feasible using the best available treatment technology.

TT

TT: Treatment Technique: A required process intended to reduce the level of a contaminant in drinking water.

AL

AL: Action Level: The concentration of a contaminant which, if exceeded, triggers treatment or other requirements which a water system must follow.

Variances and Exemptions

Variances and Exemptions: State or EPA permission not to meet an MCL or a treatment technique under certain conditions.

MRDLG

MRDLG: Maximum residual disinfection level goal. The level of a drinking water disinfectant below which there is no known or expected risk to health. MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contaminants.

MRDL

MRDL: Maximum residual disinfectant level. The highest level of a disinfectant allowed in drinking water. There is convincing evidence that addition of a disinfectant is necessary for control of microbial contaminants.

MNR

MNR: Monitored Not Regulated

MPL

MPL: State Assigned Maximum Permissible Level

 

For more information please contact:

Contact Name: Robert Poole
Address: PO Box 73
Harrison, Id 83833
Phone: 208-689-3212